Step Bi Step

[CHILLEN905]

U WILL NEED TO TEAR OFF SOME FELT FOR THE CHALK BOARD ERASER
SOME BLACK RUBBERIZED TAPE
A KNIFE AND A LIQUID GLUE STICK TUBE
http://img105.exs.cx/img105/1342/FLIX1336.jpg
UNSCREW THE TOP OF IT AND THROW IT AWAY
CUT A SMALL HOLE NEAR THE BOTTOM OF THE TUBE TO POUR IN THE INK OR THINED PAINT
http://img105.exs.cx/img105/8223/FLIX1337.jpg
TAKE THE PIECE OF FELT THAT U RIPPED OFF AND BEND IT IN HALF AND TAPE THE THE ENDS TOGETHER THIS MAKES IT EASER TO JAM IT INTO THE TUBE
http://img105.exs.cx/img105/3852/FLIX1340.jpg
TWIST THE NIB INTO THE TUBE AND LEAVE A LIL BIT OF THE TAPE SHOWING
http://img105.exs.cx/img105/9987/FLIX1341.jpg
SQUEEZ SOME SUPER GLUE INTO THE CRACKS AROUND THE NIB TO MAKE A TIGHT SEAL
http://img105.exs.cx/img105/7827/FLIX1345.jpg
GET SOME TAPE ANS WRAP IT AROUND REALLY TIGHT
http://img105.exs.cx/img105/671/FLIX1344.jpg
AFTER U RAP IT AROUND A FEW TIMES LEAVE A LIL FLAP OF TAPE THEN SUPER GLUE IT DOWN
http://img105.exs.cx/img105/3231/FLIX1346.jpg

[CHILLEN905]

AFTER THAT UR DONE TEST IT WIT WATER B4 U PUT INK IN IT SO U NO WHERE TO PUT MORE GLUE OR WHAT EVER AND SO U DONT WASTE UR INK.WHEN IT ALL SEALED RIGHT AND UVE TESTED IT FILL IT UP WIT INK OR REALLY THINED PAINTBUT DONT USE SPRAY PAINT CUZ IT CLOGGS AFTER A WHILETAPE IT UP AT THE BOTTOM AND UR DONE
U CAN FILL THEM WIT ALMOST ANYTHING THAT IS THIN ENUFF I FILLED THIS ONE WIT LEATHER DYE
http://img105.exs.cx/img105/521/FLIX1350.jpg
IT COMES OUT LIKE THIS
http://img105.exs.cx/img105/6160/FLIX1349.jpg
FILLED WIT HOME MADE KRINK
http://img105.exs.cx/img105/6922/FLIX1351.jpg

http://img105.exs.cx/img105/4585/FLIX1348.jpg
WIT THIS MOP IF U MAKE IT RIGHT U DONT HAVE TO WORRY BOUT IT LEAKIN ALL OVER UR HANDS BUT DONT PUT IT IN UR POCKET UPSIDE DOWN OR ELSE IT WILL LEAK OUT AND DONT SIT DOWN WIT IT IN UR POCKET UNLESSUR WEARIN BAGGY PANTS CUZ IT WILL SQUEEZ OUT THE INK.

THERE STEP BY STEP FOR ALL U VISUAL LEARNERS

PEACE

[CHILLEN905]

THIS IS DARKLINGS
alright
1. get this
http://img30.exs.cx/img30/1935/Jul02579.jpg

2.take cap off
http://img7.exs.cx/img7/4650/Jul02580.jpg

3.pull out nib thingy
http://img7.exs.cx/img7/6523/Jul02581.jpg

4.take out penis thingy
http://img7.exs.cx/img7/2997/Jul02584.jpg

5.empty contents
http://img7.exs.cx/img7/303/Jul02582.jpg

6.clean out nib
http://img7.exs.cx/img7/1223/Jul02583.jpg

6.put in your favorite ink and bam
http://img7.exs.cx/img7/764/Jul02585.jpg

[CHILLEN905]

DUN CLOSE DIS ONECUZ ILL PUT UP SOME MO ISH LATER

[atxbomber666]

chillen are you black or white,or are those dif people.or are you micheal jackson.

[Shrink]

THANKS FOR TYPING IN ALL CAPS BECAUSE I CANT READ IT UNLESS YOU TYPE IN ALL CAPS. Moron...

[CHILLEN905]

MI BUTTON IS BROKEN U RETARD AN IM BLACK

[DC Diesel]

I think chillen is black. I saw that kiwi mop picture posted by some one else awhile ago.

Good job chillen. LEt's educate all those toys!

I personally put in RIT clothing dye because of all the colors. So far, they've come out nice and thick. Not a lot of drips opposed to other solutions you can put in mops.

[DC Diesel]

My bad, look slike chillen beat me to tha punch.

*D*C*

[.limit.]

duh chillen black
man u guys don't look at his action shots
and who cares if hes black
he burns almost everyone of you including me obviously

[oblong]

http://img98.exs.cx/img98/828/mopalop1ly.jpg
nice chillen! great for everyone out their learning with limited supplies ;)
this is how i "roll"^

[oblong]

alright this doesnt really have any steps to it but its a good way to make use out of an old marker chamber and top area. this is an old bombing markers that was given to me from a friend who thought it was totally useless without a pump, nib and lid so i proved him wrong. illl do what i can without having pictures of it all step by step

http://img30.exs.cx/img30/5274/inside9yy.jpg
stuff chamber with shredded rag and soak with favorite ink
double over chalboard eraser and jam through the upp part of the marker to create a v like position and then soak with favorite ink

http://img74.exs.cx/img74/7893/nib1yr.jpg
random nibbage

http://img74.exs.cx/img74/8764/done8fr.jpg
top it off witha filmn canister lid
wraps electric tape around "shaft" until the lid fits snuggly

i know this isnt anyting compared to chillens but it was already made when this was started so its just a little something to show waht can be done to markers that are done to most people

hope this helped anyone out there just learning

[yeehaa sezk]

thanx for the quick tips on gettin hold of(or) making markers. i never used the board eraser meth. but check it, this how i do it in TEJAS!(sorry no pics)
1.throw on some gear(sundays best) with some "chanclas" and socks
2.stand outside the local 7-11 or cornerstore.
3.hit up the frst guy ya see with a suit and feed em some story aboput how ya need a dolla to feed your wife and kids and BOOM! once ya got ya catch> walk in ryte behind the victom and grab your self a sharpie or marks o lot! maybee some gum too.

[The Most Sadistic]

marksalot hahaha

[yeehaa sezk]

ya like that one huh! haaaa! i aint picky shoot ya might find me grabin a snikers bar on a hot sunny day scribin the telephone pole ha!

[CHILLEN905]

YA I KNOW THIS IS ANOTHER THREAD BUT WHO CARES
ZIONPINK
Here is a little photo for all you people that wanted to know how to make a NICE marker. There are five steps to this and please DO NOT POST ON THIS THREAD. THERE SHOULD BE NO QUESTIONS. If you have a questions look back at the picture for reference then just guess. :)
http://img68.photobucket.com/albums/v207/zionpnk@aol.com/How_to_make_a_marker.jpg

[Alchohlics_Anonymous]

thanx chillen for starting this thread off. thats a few less punks on the streets makin threads about retarded shit. good job.

[oblong]

^ amen to that

[inker]

sharpie or marks o lot! maybee some gum too.
damn this guy must be a hardcore tagger with his sharpies and mark alots
hahahahaha

[AmnioticOne]

Originally posted by CHILLEN905+Dec 29 2004, 02:13 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (CHILLEN905 @ Dec 29 2004, 02:13 PM)</td></tr><tr><td id='QUOTE'> YA I KNOW THIS IS ANOTHER THREAD BUT WHO CARES
ZIONPINK
Here is a little photo for all you people that wanted to know how to make a NICE marker. There are five steps to this and please DO NOT POST ON THIS THREAD. THERE SHOULD BE NO QUESTIONS. If you have a questions look back at the picture for reference then just guess. :)
http://img68.photobucket.com/albums/v207/zionpnk@aol.com/How_to_make_a_marker.jpg [/b]

Originally posted by CHILLEN905@Dec 29 2004, 02:13 PM
YA I KNOW THIS IS ANOTHER THREAD BUT WHO CARES
ZIONPINK
Here is a little photo for all you people that wanted to know how to make a NICE marker. There are five steps to this and please DO NOT POST ON THIS THREAD. THERE SHOULD BE NO QUESTIONS. If you have a questions look back at the picture for reference then just guess. :)
http://img68.photobucket.com/albums/v207/zionpnk@aol.com/How_to_make_a_marker.jpg
<!--QuoteBegin-CHILLEN905@Dec 29 2004, 02:13 PM
YA I KNOW THIS IS ANOTHER THREAD BUT WHO CARES
ZIONPNK
Here is a little photo for all you people that wanted to know how to make a NICE marker. There are five steps to this and please DO NOT POST ON THIS THREAD. THERE SHOULD BE NO QUESTIONS. If you have a questions look back at the picture for reference then just guess. :)
http://img68.photobucket.com/albums/v207/zionpnk@aol.com/How_to_make_a_marker.jpg[/quote]
Duuuuuuuuuuude... I MADE THIS PHOTO&#33;&#33;&#33; Lmao... boy... now that i look at it it looks retarded&#33;&#33; Haha, oh well... later. :wub: :wub: :wub: :wub: I do what i can to help. :D

[dageotb]

Originally posted by CHILLEN905@Dec 29 2004, 02:13 PM
YA I KNOW THIS IS ANOTHER THREAD BUT WHO CARES
ZIONPINK
Here is a little photo for all you people that wanted to know how to make a NICE marker. There are five steps to this and please DO NOT POST ON THIS THREAD. THERE SHOULD BE NO QUESTIONS. If you have a questions look back at the picture for reference then just guess. :)
http://img68.photobucket.com/albums/v207/zionpnk@aol.com/How_to_make_a_marker.jpg
yo dude you dropping science yo are in the right place

[anec]

yeah thanks chillen even though i know how to make mops and shit i liked that other maker too what was that guy talking about wiht the sharpies(thats sad) and shit it didnt make sense to me at all

[Havoc411]

well since were on the topic of Kiwi mops, where can i get griffin shoe dye?

[pawn]

how not to get arrested:

1: know the place you are bombing.. is it a company or a run down building, youd be surprised at how many cameras actually work.
2:bring clothes you can change, like 2 hats or a reversable jacket.
3:DONT go out bombing in snow if your the only one making tracks. youre fucked if the cops can see your tracks going back to the graffiti.
4: 9 or 10 oclock is a little early to be going bombing.
5:spread out your bombs, this requires energy and walking but your more screwd if there is a line of bombs behind you and not a bunch around in no order.
6:THEY WILL FIND YOUR PAINT, hide your shit well, throw it over a fence or somthing.
7:wear a hood, seriously, people are taping you

[bigbomba']

^^^^^^^ Pawn that is all toy shit that every ine SHOULD know but if they dont let them gte screwed over......





ACID

[**MATEO**]

^^^^ yea lol

[ehobo]

Pawn those r good tips

[Haloez]

alright ladies here are some steps if you want some sick ass consistancy

1.get a jenna jameson tape
2.put that shit in and do your thang
3.put your man mayo in a marker shaft
4.fill with paint
5.shake


if you dont belive me try it out yourself that shit works like a mexican at a gas station. :ph34r: (im latino so i can say that shit boyeeeeeeeee)

[pawn]

YO&#33;&#33; ive been staring at that signiture for like half an hour.. what is that??


its so good is so cool.. its awesome.. its its.. incredible&#33;&#33;

(im talking about the one of the guy with two spray cans and its got a bunch of colors and idk what it is)

[Havoc411]

Originally posted by pawn@Jan 1 2005, 01:54 PM
YO&#33;&#33; ive been staring at that signiture for like half an hour.. what is that??


its so good is so cool.. its awesome.. its its.. incredible&#33;&#33;

(im talking about the one of the guy with two spray cans and its got a bunch of colors and idk what it is)
(im talking about the one of the guy with two spray cans and its got a bunch of colors and idk what it is)

you just said what it was then said you didnt know what it was

[Shyd...]

He took a pic of him spraying the cans and then used photoshop under filter section and changed it.

[pawn]

oh shit. thats crazy. it looks like one of those things where you scrape off the black paint and under it is colors. i need to start playing with photoshop

[DNA]

"FIRST TIME PAINTING"
a step by step guide to how to go painting
(steps 2 through 6 are better done at night if you arnt very steathy or you are hitting a high traffic area)

1. go buy spray paint
2. walk/bike/run/drive/hitchhike/sail/swim/skip/what ever the fuck you want so long as it gets you to the spot you are going to hit
3. take off the colorful plastic lid on top and do as you please with it
4. to paint hold down the small nozzle on top
5. hold can a little bit more than a credit cards length from the surface while moving your hand/arm in the prefered swiflty, but not to fast. however if you move to slow you will get ugly drips
6. to fill in a certain area nice and full, spray back and forth until you have decently covered the area, then do the same but up and down. touch up any patches that look bare.

[Havoc411]

which way do i point the can?&#33;?&#33;?

[ehobo]

cool thnx

[DNA]

you point it towards your eyes.

[**MATEO**]

Originally posted by CHILLEN905@Dec 29 2004, 02:13 PM
YA I KNOW THIS IS ANOTHER THREAD BUT WHO CARES
ZIONPINK
Here is a little photo for all you people that wanted to know how to make a NICE marker. There are five steps to this and please DO NOT POST ON THIS THREAD. THERE SHOULD BE NO QUESTIONS. If you have a questions look back at the picture for reference then just guess. :)
http://img68.photobucket.com/albums/v207/zionpnk@aol.com/How_to_make_a_marker.jpg
wait who drew this..... nice work u can be my science teacher

[DNA]

**today in science, we are going to be making ghetto krink to go in the kiwi mop we made last week**

that would be so awesome as opposed to watching animal sex movies, haha, but no joke, we watched a 90 minute movie on animals haiving sex the last day before winter break. the elefant had like a 5th leg, it was lik 5 feet long, it was really gross.

[AIDOK]

and if ur face is in a picture of ur bomb, tape somthing over ur face if the cops c it

[DNA]

or get a digital camera and fuzz/blur/pixelate on your computer, or just cover your face WHEN taking the photo

[MAZESTM]

word to kiwi mops B)

--------------------------
http://photos.fotango.com/p/eba00489489f00000009.jpg

[**MATEO**]

1. go to BS shop
2. look for marker
3. buy marker
4.wait
5.enjoy marker when arrives

[ehobo]

great tip

[RookieX412]

...yeah, because i know I needed help with that one.

[king]

lol dna point it towards your eyes

[bigbomba']

Lov ehte tip on how 2 paint



ACID

[Havoc411]

What the fuck&#33;?&#33;? I totally took your advice and now im blind&#33; WHY&#33;&#33;&#33;&#33;&#33;&#33;

[oblong]

im not even going to say a smart comment relating to this thread.
it started great.....

[CHILLEN905]

ya i jus fixed mi camrea so ill make an post some mo stuff

[BAZE]

u gotta be fkn stupid to point the can to ur eyes. lol nice DNA

[Seek]

good thread chillen. noticed you said somethin about homemade krink. could you please post or PM me your recipe for your homemade krink? everytime I try at my own ink I end up with some wack shit and ink is just to pricey to get buffed anyways.


Peace.

[Havoc411]

Originally posted by BAZE@Jan 2 2005, 10:47 PM
u gotta be fkn stupid to point the can to ur eyes. lol nice DNA
you honestly thought i sprayed paint into my eyes?

[sika_2002]

haha,

[i_eat_clam]

Originally posted by Seek@Jan 3 2005, 01:19 PM
good thread chillen. noticed you said somethin about homemade krink. could you please post or PM me your recipe for your homemade krink? everytime I try at my own ink I end up with some wack shit and ink is just to pricey to get buffed anyways.


Peace.
1/4 Thinner
3/4 Aluminum Rusto bucket paint..

bla bla bla..

its that easy..
and everything gets buffed... everything...

[DNA]

here&#39;s a nice tut. just as it is in the inks thread
http://img66.exs.cx/img66/6861/ghettokrinkthetut6mo.jpg

[RookieX412]

lovely DNA just lovely...

[i_eat_clam]

humm i dont kno but.. i think mineral spirits is different from paint thinner... ask waster. he knows

[DNA]

check bee&#39;s recipe in the the inks thread

[Seek]

thanks for posting the recipe.. gonna go find that Inks thread cause I havent checked it yet. ya i know everything gets buffed and thats why I wanna make my own. so called "hard-to-buff" ink is too damn expensive and doesn&#39;t live up to the name.

Peace.

[DNA]

you dont know what Mr. Buffman goes through. i may be buffed-actually anything can be buffed-but it may just be harder for Mr. Buffman that regular Flowpen ink

[infer one]

can you imagine being a buffer and going over a dope ass piece..like pherz type shit...i would start crying...

[oblong]

alright i hope you guys can apreciate the time i put into doing it. basically this is how to make your old 30mm stubby montana L markers into a 30mm super wide flowpen. the steps are very simple so if you cant figure it out your probly 90% mental. on with the steps

http://img28.exs.cx/img28/8485/dsc041256bt.jpg
1.put glove on because this shit is going to be messy

http://img126.exs.cx/img126/7175/dumpingout4ec.jpg
2.dump the mixing ball and all extra paint out

http://img103.exs.cx/img103/3097/dsc041424tq.jpg
3.turn the water the fuck on

http://img77.exs.cx/img77/1285/cleaning0nf.jpg
4.open it all up and clean under tap

http://img126.exs.cx/img126/7017/dry1to.jpg
5.dry all parts out

http://img126.exs.cx/img126/8797/nib7ro.jpg
6.toss the nib in the dryer on low heat so you arent waiting a day for it to dry

http://img135.exs.cx/img135/7827/inkay2di.jpg
7.find your favorite purchased or homemade ink to fill

http://img149.exs.cx/img149/4541/pour4vy.jpg
8.pour your ink in

http://img4.exs.cx/img4/2931/pump8ek.jpg
9.insert pump back in

schrol down for rest of steps

[oblong]

http://img51.exs.cx/img51/9892/lidon5zh.jpg
10.screw lid on

http://img94.exs.cx/img94/9175/lidoff4qt.jpg
11.pop lid off

http://img94.exs.cx/img94/1460/dsc041361qz.jpg
12.put DRY nib in

http://img104.exs.cx/img104/1865/pump1zq.jpg
13. pump and get nib soaked with your ink


14.destroy your city :o :D

i hope this atleast helped some one :ph34r:

[DNA]

i think i could have figured that out myself, but hey, good job

[UncleSey]

take a old and useless L sized montana marker.
take out the nib.
stuff the hole where the nib was with absorbent cotton, and make shure you stuff it niceley.
then take a piece of strong sandpaper and some tape.
put the sandpaper on the absorbent cotton and tape it tight to the marker.
and thats alll now you got a nice marker that scraches into glass perfectly :huh:

[oblong]

DNA...
honestly i dont know if you would of been able to figure that outand anyways that was for the new guys who dont know much about markers

[**MATEO**]

thats a good tip oblong.... even tho i dont got a montana marker :(

[DNA]

Originally posted by oblong@Jan 5 2005, 05:00 PM
DNA...
honestly i dont know if you would of been able to figure that outand anyways that was for the new guys who dont know much about markers
shhhhhh. dont tell them&#33;&#33;&#33;&#33;&#33; :angry:

j/k

good job on the step by step part, i guess it is good to know what the marker is built like when mine runs out of ink.

[10-103m]

heres a good video for "un experienced" graffers to watch..... its a step by step type deal thing a ma-jig.....

RIGHT HURRRRR (http://www.capitalsthlm.com/media/mov/du_kor_for_fort.wmv)

[DNA]

nice

[oblong]

yes DNA it was just for people that dont know much
there has been many people come online asking on how to refill OTR
markers....... yes its sad

[DNA]

yeah, i just saw that thread, pathetic

[GeSuS_KRiST]

bump

[Havoc411]

heres my shitty giude to 3D
http://img.photobucket.com/albums/v311/Havoc411/Untitled-1copy.jpg
http://img.photobucket.com/albums/v311/Havoc411/untitled-2copy.jpg
http://img.photobucket.com/albums/v311/Havoc411/Untitled-3copy.jpg

[sika_2002]

lol, post it in toy story thread

[DNA]

3-d as told by psYKOAz

http://img95.exs.cx/img95/1218/3d4tf.jpg
and shading by someone whos name i have forgotten(and yes i know some of it is off)

http://img95.exs.cx/img95/3712/shading0we.jpg

[Havoc411]

Originally posted by sika_2002@Jan 9 2005, 10:54 AM
lol, post it in toy story thread
haha, its already there. i just thought id put it here too. seeing as it is a guide

[SHift]

any more guides to making any more markers?

[oblong]

you can make a marker from about anyting
all you need is an absorbant material
and an "oblong" or other shaped object

[Havoc411]

How To Break 4 Ribs (http://www.big-boys.com/articles/bodyslamtrash.html)

[SHift]

put more guides ;)

[bigbomba']

So.... Yea this thread is trying to die peacefully hopefully some one will revive it.

["awesome"ONE]

Will someone post a step by step guide on how to post a pic of something.

[CHILLEN905]

DAM TONY I KNOW U HAVE SOME ILL POST SOME MORE MOP GUIDES AN HOW TO MOD UR JUMBO PILOT N MAKIN A POCKET POSTER MAN LIKE DIS
http://img96.exs.cx/img96/8868/flix14246ty.jpg

[SHift]

more

[mplskid]

I WANT A STEP BY STEP ON THIS&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;
its sick as hell

http://www.lousyheroes.com/New%20Art/SenMarker2.jpg

[Havoc411]

is that the stock aplicator or a madded one?

[SLIK]

hmmmm till i got to about page 3 on this thread it was great....then it just a lil too bit off topic....sorry but can we get some more STEP BY STEP&#39;s here....?

[xx13]

at first i thought this http://www.lousyheroes.com/New%20Art/SenMarker2.jpg
was made of this http://www.dove.com/images/your_skin/apdeo_rollon_fresh_lg.jpg
but i guess i was wrong.

[tasor_tbc]

Originally posted by xx13@Jan 23 2005, 02:55 PM
at first i thought this http://www.lousyheroes.com/New%20Art/SenMarker2.jpg
was made of this http://www.dove.com/images/your_skin/apdeo_rollon_fresh_lg.jpg
but i guess i was wrong.
THAT is one CRAZYYYY marker&#33;&#33;&#33;&#33;&#33;&#33;
i wanna make that so badly&#33;&#33;

[tasor_tbc]

yea but what i like is how nice an clean that marker looks. like wtf did this guy use as a nib???

[Shyd...]

First off you can buy these at a doller store. They usually come in packs of 3. Mine are made by Bizzi. The nib comes with the paint tube. Just unscrew it and empty it out fill it will paint and put the screw on nib back on. Pretty good cause they are cheap you could just steal it but its only &#036;1.

[tasor_tbc]

Originally posted by Shyd...@Jan 23 2005, 03:15 PM
First off you can buy these at a doller store. They usually come in packs of 3. Mine are made by Bizzi. The nib comes with the paint tube. Just unscrew it and empty it out fill it will paint and put the screw on nib back on. Pretty good cause they are cheap you could just steal it but its only &#036;1.
woah woah woah hold up &#33;&#33;&#33;&#33;&#33; i think i know what those are. arnt those them window painting markers?? they look kinda similar&#33; and yeah they do have those at a stationary store&#33;&#33;

[tasor_tbc]

and at dollar stores to

[Shyd...]

No its not a window writer. Did you not listen to what anyone said. Its a glue stick. The kind that puts out liquid glue. and you just empty that and use it. Probably the 3 cheapest markers you can make are the glue stick, face painters, and window writers. You can buy those all at the dollar store i think.

[mplskid]

heres what it looked like before mods http://image.misterart.com/grouppix/528x352/1000/g1831.jpg

[mplskid]

probably why he wraped it in a sticker ;)

[mplskid]

i bet a sticker would help a little

[tasor_tbc]

those sticks are sick. lol i am definately gonna get one of those LOL. but were did the guy get that cool nib from??

[tasor_tbc]

or does it come on the stick???

[mplskid]

can some1 post a step bi step on doing shadows on letters im strugglin with it and it would be much appreacited :D

[CHILLEN905]

LOOK BACK IN THA DAM PAGES

[Havoc411]

hey chillen, you still gonna post that step by step on pilots? cause im intersted as to what you can do with them

[dez1]

Originally posted by CHILLEN905@Dec 29 2004, 10:44 AM
U WILL NEED TO TEAR OFF SOME FELT FOR THE CHALK BOARD ERASER
SOME BLACK RUBBERIZED TAPE
A KNIFE AND A LIQUID GLUE STICK TUBE
http://img105.exs.cx/img105/1342/FLIX1336.jpg
UNSCREW THE TOP OF IT AND THROW IT AWAY
CUT A SMALL HOLE NEAR THE BOTTOM OF THE TUBE TO POUR IN THE INK OR THINED PAINT
http://img105.exs.cx/img105/8223/FLIX1337.jpg
TAKE THE PIECE OF FELT THAT U RIPPED OFF AND BEND IT IN HALF AND TAPE THE THE ENDS TOGETHER THIS MAKES IT EASER TO JAM IT INTO THE TUBE
http://img105.exs.cx/img105/3852/FLIX1340.jpg
TWIST THE NIB INTO THE TUBE AND LEAVE A LIL BIT OF THE TAPE SHOWING
http://img105.exs.cx/img105/9987/FLIX1341.jpg
SQUEEZ SOME SUPER GLUE INTO THE CRACKS AROUND THE NIB TO MAKE A TIGHT SEAL
http://img105.exs.cx/img105/7827/FLIX1345.jpg
GET SOME TAPE ANS WRAP IT AROUND REALLY TIGHT
http://img105.exs.cx/img105/671/FLIX1344.jpg
AFTER U RAP IT AROUND A FEW TIMES LEAVE A LIL FLAP OF TAPE THEN SUPER GLUE IT DOWN
http://img105.exs.cx/img105/3231/FLIX1346.jpg
HOW did u stay so fucking clean&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33; i tryed that and got coverd in DIRTY ASS FLOW PEN INK witch dosent cum off 2 easy lol. my advice WEAR GLOVES :ph34r: :blink:

[mplskid]

Originally posted by CHILLEN905@Jan 25 2005, 11:16 AM
LOOK BACK IN THA DAM PAGES
no i want one for round letters thats for square like letters

[CHILLEN905]

ill make u one then

[CHILLEN905]

Originally posted by dez1+Jan 25 2005, 06:59 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (dez1 @ Jan 25 2005, 06:59 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-CHILLEN905@Dec 29 2004, 10:44 AM
U WILL NEED TO TEAR OFF SOME FELT FOR THE CHALK BOARD ERASER
SOME BLACK RUBBERIZED TAPE
A KNIFE AND A LIQUID GLUE STICK TUBE
http://img105.exs.cx/img105/1342/FLIX1336.jpg
UNSCREW THE TOP OF IT AND THROW IT AWAY
CUT A SMALL HOLE NEAR THE BOTTOM OF THE TUBE TO POUR IN THE INK OR THINED PAINT
http://img105.exs.cx/img105/8223/FLIX1337.jpg
TAKE THE PIECE OF FELT THAT U RIPPED OFF AND BEND IT IN HALF AND TAPE THE THE ENDS TOGETHER THIS MAKES IT EASER TO JAM IT INTO THE TUBE
http://img105.exs.cx/img105/3852/FLIX1340.jpg
TWIST THE NIB INTO THE TUBE AND LEAVE A LIL BIT OF THE TAPE SHOWING
http://img105.exs.cx/img105/9987/FLIX1341.jpg
SQUEEZ SOME SUPER GLUE INTO THE CRACKS AROUND THE NIB TO MAKE A TIGHT SEAL
http://img105.exs.cx/img105/7827/FLIX1345.jpg
GET SOME TAPE ANS WRAP IT AROUND REALLY TIGHT
http://img105.exs.cx/img105/671/FLIX1344.jpg
AFTER U RAP IT AROUND A FEW TIMES LEAVE A LIL FLAP OF TAPE THEN SUPER GLUE IT DOWN
http://img105.exs.cx/img105/3231/FLIX1346.jpg
HOW did u stay so fucking clean&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33; i tryed that and got coverd in DIRTY ASS FLOW PEN INK witch dosent cum off 2 easy lol. my advice WEAR GLOVES :ph34r: :blink: [/b][/quote]
thats y i said to test it with waster b4 u put ink in a waste it or wear gloveas its common sense but i dont mi hands have been dyed every color i be lookin like a friggin rain bow

[CHILLEN905]

Originally posted by dez1+Jan 25 2005, 06:59 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (dez1 &#064; Jan 25 2005, 06:59 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-CHILLEN905@Dec 29 2004, 10:44 AM
U WILL NEED TO TEAR OFF SOME FELT FOR THE CHALK BOARD ERASER
SOME BLACK RUBBERIZED TAPE
A KNIFE AND A LIQUID GLUE STICK TUBE
http://img105.exs.cx/img105/1342/FLIX1336.jpg
UNSCREW THE TOP OF IT AND THROW IT AWAY
CUT A SMALL HOLE NEAR THE BOTTOM OF THE TUBE TO POUR IN THE INK OR THINED PAINT
http://img105.exs.cx/img105/8223/FLIX1337.jpg
TAKE THE PIECE OF FELT THAT U RIPPED OFF AND BEND IT IN HALF AND TAPE THE THE ENDS TOGETHER THIS MAKES IT EASER TO JAM IT INTO THE TUBE
http://img105.exs.cx/img105/3852/FLIX1340.jpg
TWIST THE NIB INTO THE* TUBE AND LEAVE A LIL BIT OF THE TAPE SHOWING
http://img105.exs.cx/img105/9987/FLIX1341.jpg
SQUEEZ SOME SUPER GLUE INTO THE CRACKS AROUND THE NIB TO MAKE A TIGHT SEAL
http://img105.exs.cx/img105/7827/FLIX1345.jpg
GET SOME TAPE ANS WRAP IT AROUND REALLY TIGHT
http://img105.exs.cx/img105/671/FLIX1344.jpg
AFTER U RAP IT AROUND A FEW TIMES LEAVE A LIL FLAP OF TAPE* THEN* SUPER GLUE IT DOWN
http://img105.exs.cx/img105/3231/FLIX1346.jpg
HOW did u stay so fucking clean&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33;&#33; i tryed that and got coverd in DIRTY ASS FLOW PEN INK witch dosent cum off 2 easy lol. my advice WEAR GLOVES :ph34r: :blink: [/b][/quote]
thats y i said to test it with water b4 u put ink in a waste it or wear gloveas its common sense but i dont mi hands have been dyed every color i be lookin like a friggin rain bow

[juc}}]

does any 1 know how two make a dual color streaker ?

[CHILLEN905]

frigg i had a guide to this too ill look for it man

[bumsuckfun]

Originally posted by juc}}@Jan 26 2005, 07:55 PM
does any 1 know how two make a dual color streaker ?
this isn&#39;t a guide but it&#39;ll hold you over until one is posted...

basically, to make a dual colored streaker you have to freeze it, and take it all the way out of it&#39;s tube. using a razor you can then cut it in two. you now have 2 different color streak halves. you put them back into the tube, and let it rewarm so that they should bond together. that&#39;s the jist of it.

[meatgrinder]

get friends that write
become a name dropper ( i know this guy and this guy)
start writting with them
start becoming a egomaniac when people recognize your name
get arrested several times
dont pay finds..or show up to court
get arrested and do small bids of time
get out, work telemarketing until u get a woman pregnant
quit and go to work at the box factory
the end

[Coo]

the best step bi step here^^

[Havoc411]

you forgot the part about becoming a misreable drunk nad beating that woman you got preagnant

[Havoc411]

heres my flowpen guide.(for drips, not clean lines&#33;&#33;)
step 1, get ready to pump that sucker
http://img.photobucket.com/albums/v311/Havoc411/flowpenguide1.jpg
step 2, give it a few quick pumps
http://img.photobucket.com/albums/v311/Havoc411/flowpenguide2.jpg
step 3, start writing
http://img.photobucket.com/albums/v311/Havoc411/flowpenguide3.jpg
step 4, let it be. it&#39;ll drip on its own (note it didnt drip too well here cause its really cold outside)
http://img.photobucket.com/albums/v311/Havoc411/flowpenguide4.jpg

thats about it

[Tony]

if you need a guide on how to make a flow pen drip






you must be retarded.

[juc}}]

lmao^

[bigbomba']

^ are you a bit ummm "Slow" you should use the how to make drips.... as if no one could figure that one out buddy... wow you just inlightend all of the toys on BS thanks&#33;

[Havoc411]

Originally posted by Tony@Jan 29 2005, 04:08 AM
if you need a guide on how to make a flow pen drip






you must be retarded.
believe me when i say this, but i got asked by someone on here in the OTR thread. they "couldnt make their flowpen drip". fucking idiots

[Havoc411]

Originally posted by shortlilcoolman@Jan 25 2005, 06:04 PM
i cant get my flowpen to drip..haha im sadd..any tips on that? ..and i left my pen sitting overnight upright..then the next mornin all this ink was gathered in the capp.wats taht about/?..aite thanx..peace



see

[ILL]

Guide to make a chap stick marker

1. empty out and clean a chap stick container
2.get a candle and melt some wax in the container so it makes it water proof
3.test the container with water to make sure it won&#39;t leak and if you wan&#39;t you can put some tape around the bottom to help keep it from leaking
4.cut a strip out of a sock or something for the nib
5.roll the strip and put tape around the bottom of the strip to hold it together
6.put the ink in the container
7.stick the strip in the container and if it dosen&#39;t fit cut some of the strip off and you can glue it in if it won&#39;t go in enuf that it won&#39;t come out

[hitshit89]

COULD SOMEONE POST A GUIDE ON HOW TO MAKE AN ETCH MARKER?? :ph34r:

[CHILLEN905]

BINGO DABBER&#33;&#33;&#33;&#33;&#33; BUT IF U DONT EVEN KNOW HOW TO MAKE A MARKER U SHOULDNT EVEN BE GOIN ANYWHERE NEAR ETCH MAN

[Silvar]

hehe stuff makin an etch marker... that lil dremel multitool handheld thingy is well good, jus put wateva tool bit u want on the end and scratch away&#33; half as dangerous as etch...

[hitshit89]

yo chillen i like i said i know a shit load about etch and have used my friends etch i know how dangerous it is and what to do if you get any on you its just that i cant make a good etch marker :ph34r:

[Steez]

this should be stickied...........................

[Havoc411]

top, common sense bud

[Jedi]

the paint is going to go into the can that has less pressure.

depending on how you do it, that would be the cold one. i think.

[Havoc411]

yeah, but the cold one should be on top cause if you know how the valve on a can works you&#39;d know why

[casperFT]

Originally posted by DNA@Jan 1 2005, 08:22 PM
"FIRST TIME PAINTING"
a step by step guide to how to go painting
(steps 2 through 6 are better done at night if you arnt very steathy or you are hitting a high traffic area)

1. go buy spray paint
2. walk/bike/run/drive/hitchhike/sail/swim/skip/what ever the fuck you want so long as it gets you to the spot you are going to hit
3. take off the colorful plastic lid on top and do as you please with it
4. to paint hold down the small nozzle on top
5. hold can a little bit more than a credit cards length from the surface while moving your hand/arm in the prefered swiflty, but not to fast. however if you move to slow you will get ugly drips
6. to fill in a certain area nice and full, spray back and forth until you have decently covered the area, then do the same but up and down. touch up any patches that look bare.
you use stock caps

[Havoc411]

theres nothing wrong with stock caps. you can get some thin lines with stock rusto caps

[pogopope]

Originally posted by Havoc411@Jan 31 2005, 07:03 PM
top, common sense bud
thanks, first i thought the bottom cos of gravity, then i thought the top cos it was spraying up, then....i was confused

thank you tho. its nice to learn something new, ill have to give it a try tomorro

[Havoc411]

paint valves have a plastic "straw" coming off them to the bottom of the can so when you hold it upside down its blowing out air not paint, and vise versa. so when you hold it upside down your not gonna get paint from that can in the other can just in case it dosent work or whatever.

[Havoc411]

Originally posted by Havoc411@Jan 31 2005, 07:36 PM
yeah, but the cold one should be on top cause if you know how the valve on a can works you&#39;d know why
that already answered them

[Kayone707]

Originally posted by Havoc411+Feb 1 2005, 02:17 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Havoc411 @ Feb 1 2005, 02:17 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-Havoc411@Jan 31 2005, 07:36 PM
yeah, but the cold one should be on top cause if you know how the valve on a can works you&#39;d know why
that already answered them [/b][/quote]
shut up bitch dont try to correct me or say that u posted the answer first

[CrAiG]

:ph34r: Do you know how to make an XXL drip marker ???

[bumsuckfun]

i can&#39;t figure out if this guy is
1) retarded
2) ignorant
or 3) just messing around.

[mplskid]

can someone post how to mod a woodcraft? do you keep the pump and ball in the marker?

[bumsuckfun]

mod in what way? like putting in your own ink? or to like make it drip and stuff? there is more than one mods for those markers...

[mplskid]

i tried filling it with krink and it didnt work are you supposed to take out the ball, pump, both or neither?

also how do you make black and white paint for makers the same way as krin with just different color paint?

[Havoc411]

Originally posted by Kayone707+Feb 2 2005, 04:11 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (Kayone707 @ Feb 2 2005, 04:11 AM)</td></tr><tr><td id='QUOTE'>
Originally posted by Havoc411@Feb 1 2005, 02:17 PM
<!--QuoteBegin-Havoc411@Jan 31 2005, 07:36 PM
yeah, but the cold one should be on top cause if you know how the valve on a can works you&#39;d know why
that already answered them
shut up bitch dont try to correct me or say that u posted the answer first [/b][/quote]
but i didnt correct you, i just said i answered the kid he gave an answer to already. you dont gotta get all uppity about it

[Havoc411]

http://shop.usps.com/images/moistener_d.jpg
stamp moistener, avaliable at the usps store for like 2 bucks. possible mop. if i had some dough id order one and mod it, but i dont. if anyone has say something, i think it might be a good idea

[mplskid]

i just ordered some stickers and saw that and thought the same thing

[bumsuckfun]

tip: ink for markers. paint for mops.

chances are, krink isn&#39;t going to flow through the nib on your woodcraft? why you ask? because that nib was made to let through very thin alcohol-based inks, very thin water-based inks/paints, and in a few cases special super-thin oil-based paint.

if you want it to work, take out that nib, take out that pump, and put in the tradition chalkboard eraser felt nib...

if you want to make it drip with ink, or something else that flows through the normal nib, then all you do is take out the valve, heat up a long/thin needle, put the nib in and slide the red-hot needle through the plastic on the side of the top and through the nib. this holds the nib in place so it won&#39;t fall in or out (remember, the valve system isnt there to support the nib anyjmore). store upright ;)

[mplskid]

^^^ hahaha i didnt understand any of that im a visual learner could you post some pics?

sorry and thank you

[SHift]

Originally posted by Havoc411@Feb 2 2005, 09:00 PM
http://shop.usps.com/images/moistener_d.jpg
stamp moistener, avaliable at the usps store for like 2 bucks. possible mop. if i had some dough id order one and mod it, but i dont. if anyone has say something, i think it might be a good idea
hey i saw one of those at a office supply warehouse and they also have the one that looks like a pen. The place is called fisher&#39;s and their is a wide variety of markers like streakers,paint,paint markers and all kinds of shit. i tried modding one of those and the nib came off and made a fucking mess. that shit sucks&#33;&#33;&#33;

[Tony]

i grabed a few of them at some staples here, it said they were like 75 cents or something, but they were free.


fill with paint, use, throw away.



and i mean use right after you fill it, they dont have caps.

[3rdworld]

Originally posted by bumsuckfun@Feb 2 2005, 09:51 PM
tip: ink for markers. paint for mops.

chances are, krink isn&#39;t going to flow through the nib on your woodcraft? why you ask? because that nib was made to let through very thin alcohol-based inks, very thin water-based inks/paints, and in a few cases special super-thin oil-based paint.


the shit in the woodcrafts isnt exactly the thinnest stuff around. i put krink in it and works perfect, even drips on the surface. (cause the krink is thinner than the woodcraft shit)
mplskid make sure the shit your putting in there is thinned enough... that might be your problem.

[bumsuckfun]

yeah, i don&#39;t know it strange.... i tried filling uniposca broads (same idea) with ghetto krink that was pretty thin and had no success.... but now i&#39;m curious haha. I&#39;ll probably try it again once i &#39;acquire&#39; a posca with a virgin nib.

[Havoc411]

Originally posted by Tony@Feb 3 2005, 02:05 AM
i grabed a few of them at some staples here, it said they were like 75 cents or something, but they were free.


fill with paint, use, throw away.



and i mean use right after you fill it, they dont have caps.
you might be able to fashion one out of something, ill try if i can get my hands on one.

[mplskid]

Originally posted by 3rdworld+Feb 3 2005, 02:06 AM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (3rdworld @ Feb 3 2005, 02:06 AM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-bumsuckfun@Feb 2 2005, 09:51 PM
tip: ink for markers. paint for mops.

chances are, krink isn&#39;t going to flow through the nib on your woodcraft? why you ask? because that nib was made to let through very thin alcohol-based inks, very thin water-based inks/paints, and in a few cases special super-thin oil-based paint.


the shit in the woodcrafts isnt exactly the thinnest stuff around. i put krink in it and works perfect, even drips on the surface. (cause the krink is thinner than the woodcraft shit)
mplskid make sure the shit your putting in there is thinned enough... that might be your problem. [/b][/quote]
i took out the pump i think that what fucked it up cuz im useing 2/3 ace oil based paint and 1/3 thinner i will try again next time i get a woodcraft

[STRIFE]

once i get some cash im goin out gettin some of that silver bucket paint...ghetto krink is sounding good

[xx13]

ya know it costs like &#036;2 0r 3for a little bucket

[3rdworld]

Originally posted by mplskid+Feb 3 2005, 04:42 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (mplskid @ Feb 3 2005, 04:42 PM)</td></tr><tr><td id='QUOTE'>
Originally posted by 3rdworld@Feb 3 2005, 02:06 AM
<!--QuoteBegin-bumsuckfun@Feb 2 2005, 09:51 PM
tip: ink for markers. paint for mops.

chances are, krink isn&#39;t going to flow through the nib on your woodcraft? why you ask? because that nib was made to let through very thin alcohol-based inks, very thin water-based inks/paints, and in a few cases special super-thin oil-based paint.


the shit in the woodcrafts isnt exactly the thinnest stuff around. i put krink in it and works perfect, even drips on the surface. (cause the krink is thinner than the woodcraft shit)
mplskid make sure the shit your putting in there is thinned enough... that might be your problem.
i took out the pump i think that what fucked it up cuz im useing 2/3 ace oil based paint and 1/3 thinner i will try again next time i get a woodcraft [/b][/quote]
i kept the pump in, works damn good,

[mplskid]

im gonna try it this weekend if i had a digi i would do a step bi step but sadly i dont <_<

[CrAiG]

Hey guys,how can I make an Aerosol Art bombing marker a flowpen???

PLEASE,WITHOUT CHANGING THE INK

[bumsuckfun]

what do you mean make one? you have to buy those...

[CrAiG]

I mean to make the Aerosol marker Drip.

[bumsuckfun]

pump the nib a bunch before writing and it might drip... i don&#39;t know, i found the paint inside of aerosol art markers not to flow very well.

[CrAiG]

What if we put a bit of paint thinner in???

[dense]

B)

o.k i just made a white-out bombing maker man.............

here are the steps:

-its a little messy so wear gloves.

1.get a glue stick thing, get white-out {dont empty it}
2.get a chalkboard eraser
3.cut a pice of chalkboard eraser, clean it out with water
4.empty glue stick,clean it out with water
5.get the white-out and open it and pour the bitch in the glue stick all most to the top.keep top you will need it.
6.take the pice of chalkboard eraser and fold it in. make sure you cut a right size of eraser so it can fit.
7.put the top of the glue sick back on and shake for 45 seconds or so.

and this is what you shold get:

http://img219.exs.cx/img219/2080/whiteoutstickmaker43lg.jpg

http://img204.exs.cx/img204/8066/whiteoutstickmaker35ul.jpg

http://img204.exs.cx/img204/7452/whiteoutstickmaker23bo.jpg

http://img204.exs.cx/img204/3647/whiteoutstickmaker2ky.jpg

[ILL]

how permanent is white out?

[dense]

Originally posted by ILL@Feb 5 2005, 08:42 PM
how permanent is white out?
real permanent and it smells more than paint, im still high.
plus i cant really get it off my fingers. it will take at least a day or two.
so its just like paint.

B)

[ILL]

Originally posted by dense+Feb 5 2005, 09:46 PM--></div><table border='0' align='center' width='95%' cellpadding='3' cellspacing='1'><tr><td>QUOTE (dense @ Feb 5 2005, 09:46 PM)</td></tr><tr><td id='QUOTE'> <!--QuoteBegin-ILL@Feb 5 2005, 08:42 PM
how permanent is white out?
real permanent and it smells more than paint, im still high.
plus i cant really get it off my fingers. it will take at least a day or two.
so its just like paint.

B) [/b][/quote]
alright i&#39;ll try it

[aCId II nz]

k so first u wet two fingers on ur right hand and slide it in nice and slow and then u get ur thumb on the left hand wet it and start rubbin and while doing that start furiously...........hahahhahahaahahhaha



TANG TANg TAng Tang tang

[STRIFE]

lol wow

i hate when people use white out pens, it angers me

[oblong]

oblong visual guide to krink

http://img233.exs.cx/img233/812/supplies7ft.jpg

get all your stuff together
mixing utensil, conatiner, paint thinner, and of course chrome/aluminum paint

http://img104.exs.cx/img104/9526/pouringchrome29eu.jpg
pour yourself some paint into the container

http://img233.exs.cx/img233/5463/thinner9yi.jpg
pour yourself some "thinnaa" in there


mix it all up
destroy your city

[bumsuckfun]

not only do me and oblong use the same type of paint to make our krink, we also use the same thinner. we kick soooo much ass. (although the last batch used mineral spirits instead of paint thinner... same brand though, just that purple label.)

[aCId II nz]

has anyone tryed my *fake guide?

[CraYon]

Any one have a deodorant mop guide? Visuals are appreciated...

[nukone]

nukone industrys proudly presents ...

=*HOW TO DO A SIMPLE DUB*=

1 http://img.photobucket.com/albums/v333/nukone/1.jpg
2 http://img.photobucket.com/albums/v333/nukone/2.jpg
3 http://img.photobucket.com/albums/v333/nukone/3.jpg
4 http://img.photobucket.com/albums/v333/nukone/4.jpg
5 http://img.photobucket.com/albums/v333/nukone/5.jpg

for all who do not know it



www.fotolog.net/nukone

[nukone]

nukone industrys presents...

=*HOW TO MAKE A FAT CAP FATTER*=

1 un modded cap
(notice width of hole in stem)

http://img.photobucket.com/albums/v333/nukone/originalfatcap.jpg


2 modded cap
(notice stem)
http://img.photobucket.com/albums/v333/nukone/moddedfatcap.jpg

just cut some of that plastic asyw to make yourself an even fatter cap

[Havoc411]

how is that supposed to make it fatter? more pressure going through it or something?

[nukone]

yeah its somthin like that

it works but also makes it faster which is a bit annoyin but hey

[bumsuckfun]

EDIT: YOU HAVE TO RIGHT CLICK ON THE LINKS AND OPEN THE PICTURES IN A NEW WINDOW TO SEE THEM.

Step by Step Guide for what to do if the Soviet army invades your city/town/village:

Step 1: Fill a glass bottle about half full with gasoline. Add in a bit of dish detergent (the thickness/bubbles will make it stick to things better when burning).

Step 2: Wipe the bottle clean of any gasoline.

Step 3. Get a clean rag, rap it around a bottle cork (just a bit around the side so that the rag stays connected to the bottle) and put that cork in there. Make sure its in there air and liquid tight so none of it spills into your schoolbag.

Step 4: Fill a schoolbag with these devices. Bring matches. And bring a small container of alcohol or oil for soaking the rag before throwing.

Step 5: Find a friend (for company/protection), and get yourself a nice rooftop position.

Step 6: Get your bottles and dip your rags into the alcohol or oil, and light
http://www.sproe.com/images/screenshots/molotov-01-large.jpg

Step 7: Throw at target... look for vunerbilities such as an open cockpit like in this picture. http://www.sproe.com/images/screenshots/molotov-02-large.jpg
http://www.sproe.com/images/screenshots/molotov-03-large.jpg

Step 8: Watch your target scream in pain as they burn in death (possibly the most painful way to die). If your nice you would shoot them as they run/roll around miserably.
http://www.sproe.com/images/screenshots/molotov-04-large.jpg

If the cockpit isn&#39;t opened, continue pelting the tack with molotovs, they are a very effective anti-tank weapon.

[Havoc411]

napalm guide


pour small bowl half way with gasoline. ass styrofoam a little at a time (it melts and turns to jelly in the gas) and keep adding styrofoam till theres no more liquid gas left. store in plastic baggie and break it out for some enjoyment&#33; try putting it on a spoon lighting it and flinging it at trees.

[bigbomba']

^ wow to bad i cant see your pics on what 2 do when the Sovits invade,


throwing burning jelly with a spoon? wow that sounds effective, there will be little burning puddles hte size of dimes every where.... i would walk around them and the shoot you in the face with a sawed of 12g, but hey thats just me&#33;

[bumsuckfun]

yes, you can use that technique to mix paint, to refill cans, or to add gas to cans to give them higher pressure, or any combination of the 3.

[maze.dsk]

cool thanks

[BAZE]

wow the cap thing works. i did it on stocks.lol

[bigbomba']

has any one ever did a rollor type of thing with a floor mop a mop bucket filled with paint and some shit hole wall??


i have not attempted this..........yet......

[Havoc411]

rollers are cheaper than floor mops and look better

[meks]

i got this you think http the dye inside is permenent enough??cuz i hate making inks.
http://www.walgreens.com/store/product.jht...push&navCount=1 (http://www.walgreens.com/store/product.jhtml?CATID=100749&id=prod3874&skuid=sku303874&navAction=push&navCount=1)

[Havoc411]

fill it with Ghetto KRINK. and dont use the leather dye with the applicator before you empty it out, youll fuck it up. its not worth using the leather dye

[meks]

k ill go buy some thinner and stop bein lazy

[bigbomba']

your using the mop to tag like the whole parking lot&#33;&#33;

or maby not but i suppose rollers are cheaper than mops

[Shyd...]

Originally posted by Havoc411@Feb 8 2005, 09:42 AM
napalm guide


pour small bowl half way with gasoline. ass styrofoam a little at a time (it melts and turns to jelly in the gas) and keep adding styrofoam till theres no more liquid gas left. store in plastic baggie and break it out for some enjoyment&#33; try putting it on a spoon lighting it and flinging it at trees.
Edit onto your guide make sure there is some gas left because it keeps the napalm moist. I made a shit load 2 weeks ago and made those torches that they use like in the midevil times where they have a stick with fire on top. But anyways I put the napalm on it and it hardened but it doesn&#39;t light very well with a lighter. It still does but not as good so just if you make it in a bucket make sure some gas is left in there.

[Havoc411]

yeah, ive never had it last more than one night. lol, its fun at the park when theres small mounds of sticks and leaves

[Juice+]

regular gas is ok... but if you have JET FUEL... then that makes for ultimate long lsating fire&#33;

[Havoc411]

the fuck do you get jet fuel? siphoning(sp) it from jumbo jets?

[Ume]

has anyone here made a Co2 bomb?

you get rocket engines from your local hobbie store, take the powder out of it(or gun powder if you prefer) empty the Co2 out and drill a bigger hole into the top where the Co2 escapes, then fill it about 75% of it and get those sparklers cut the part you hold it with off and stick it into the hole(the cut off handle part first) then light it, run, and watch it explode, for more of a fireball/explosion duct tape 4 cans of anything that says it&#39;s explosive and flammable onto it(making sure that the seams of the can are pointed towards the Co2 cartridge), enjoy.

[Havoc411]

alot of the shit in the anarchy cookbook has bad recipies and will probably kill you if you try to make them. just a warning.

[Ume]

lol i know, me and some friends have had somethings that could killed someone a couple times, but they never happen...thats the book they got it from, i just learned from them.

[Juice+]

Originally posted by Havoc411@Feb 14 2005, 07:23 PM
the fuck do you get jet fuel? siphoning(sp) it from jumbo jets?
well, i work at the airport so i have access to 130 octane turbine based jet fuel. I know everyone dont have access but if you ever get a chance at using it... take it, cause that shit burns hot and long.... my roomate lit our steps on fire and the flames were 5 feet high for about 7 minutes. He was an idiot tho

[Shyd...]

Why waste the time to buy jet fuel man just make more napalm and just to let you know you don&#39;t need much gas it doesn&#39;t absobe hardly any gas.

[bigbomba']

y woodnt u jsut use a can of paint and some duct tape and a M 80 to make a bomb y use a Co2 tank??^^

[Shyd...]

Or just do what they did on War 2 and tape the cap down and light a match and it will go into the can and blow up.

[Ume]

Originally posted by bigbomba&#39;@Feb 14 2005, 07:45 PM
y woodnt u jsut use a can of paint and some duct tape and a M 80 to make a bomb y use a Co2 tank??^^
not a Co2 tank, but a tiny cartidge that goes for those pellet handguns....and guess what you can&#39;t get M80&#39;s here in tbay, plus it&#39;s cheaper, and you can more outta a pack of 25 Co2 things.

[Havoc411]

ooooooh, i thought you meant like a big CO2 thing. like this
http://www.paintball-discounters.com/tank_co2_12oz_chrome.jpg
(12oz paintball cylinder)

[Ume]

fuck that, why waste something that you can refill?

i mean these little dealios

http://img.photobucket.com/albums/v367/Teemo/Co2.jpg

[Havoc411]

ah, the 12 gram cartridges that BBguns use

[Ume]

exactly, it makes a good sized fireball with the areosal cans strapped on and its easier to conceal those little things if you have something planned with them. ;)

[pogopope]

Originally posted by bumsuckfun@Feb 2 2005, 09:51 PM
if you want it to work, take out that nib, take out that pump, and put in the tradition chalkboard eraser felt nib...

^^^ hahaha i didnt understand any of that im a visual learner could you post some pics?

sorry and thank you

ill have pics of this in a few days if u still want them...

[Juice+]

lol... dammit

why dont you just get some uranium, liquid nitrogen and some radioactive biohazardous materials. Make stuff. Freeze things. give them cancer. fuck&#33;

I think all the toys have given up asking for help because topics like explosives are more important to everyone else besides them getting help...

Someone post some flix so we can help... and then start a new thread about explosives :)

[maze.dsk]

does an one know how to make a fat cap from a stalk cap?

[bumsuckfun]

SEARCH DAMNIT. hell, you don&#39;t even need to search, in the Tools & Tips section look about halfway down the page for the &#39;Cutting Caps&#39; thread... or in THIS VERY THREAD (Step Bi Step) go back a few pages and there is a step by step to making fat caps and it includes pictures... that&#39;s right, IN THIS FUCKING THREAD. look before you ask dumb quesitons.

[THEPOSTWHORE5000]

i agree with bumsuckfun...you guys really need to stop being so lazy...and start using better grammar so we know what the hell you are talking about

"does an one know how to make a fat cap from a stalk cap?"

LOL

[Havoc411]

lol, stalk?
http://www.lib.umich.edu/pap/exhibits/papyrus_making/images/lg_stalk.jpg

[3rdworld]

you mean stock cap?

[bumsuckfun]

i imagine it&#39;s people like him that keep people liek beeone234 from helping out in here anymore

[CaptSnuffy]

totse.com has cool explsive info

liguid oxygen would be awesome to use for the napalm

i dnt think aerosol cans can explode since there&#39;s no oxygen inside the can (and as you know fire needs oxygen to burn)

[THEPOSTWHORE5000]

we&#39;ve exploded spraypaint cans, and that worked pretty good....but it was soooo fuckin loud and a mess lol

[CaptSnuffy]

if you do it while its in your hand that&#39;d fuck you up

[bigbomba']

no thats how hard asses get there battel scars... blow up a can of paint in your hand its super fun&#33;&#33;&#33; jk dont pay any attention to what i just typed&#33;

[Havoc411]

i saw a kid light a firecracker between his teeth. thats actually not a lie, hahaha

[bigbomba']

did it blow his brace face apart?

[Ume]

its a firecracker, it doesnt hurt if it blows up in your hand or teeth.


i dnt think aerosol cans can explode since there&#39;s no oxygen inside the can (and as you know fire needs oxygen to burn)
But the explosion from the Co2 cartidge rips open the areosal cans then it realeases the fumes and then explodes.

[DROZDHCRUE]

i wouldnt waste spraypaint blowing it up...cuz all i use is montana

[Ume]

well sorry we dont all got money like you do :rolleyes: and i dont waste even the shittiest paint i got, all i use is like bug spray and hair spray, stuff like that.

[Alchohlics_Anonymous]

hahah i got mad one time so i threw a can at the wall and the paint started fuckin flying out from everywhere and the can was spinning all around. some dope shit...haha.

[bigbomba']

i have blew up bug spra but thats normal.... i sorta threw the can of Raid in to a bond fire

[ADUB510]

DAMN this page helped me teh fuck out. i got most of the supplies at home to make these pens , im jus gettin started in taggin wit some friends an aint got no money but lotsa shit like this a home *SWEET*.

[mad]

i tried that cap thing were u make the little slit bigger

it didnt make the width of the paint bigger it just made it come out faster

whats the deal?

[o0 *diSc* 0o]

i dono wats wrong wit the one u did, but i did it and it worked

[Havoc411]

Originally posted by mad@Feb 19 2005, 12:44 PM
i tried that cap thing were u make the little slit bigger

it didnt make the width of the paint bigger it just made it come out faster

whats the deal?
more pressure = fatter spray

try holding it back farther, if you really want you can get thin lines with anything, ive gotten thin lines with orange dots. but hold it back farther and the spray difference should be noticable

[xx13]

for step by steps go to rustoleum website and under whats your project choose graffiti

[meks]

disc what cap did yoiu do it on?

[shyone]

Fairly easy to do, doesn&#39;t even need a tutorial for this, but might help you out with some advices and save you some time.

Materials
1. Platic Pipe (the diameter is up to you..)
2. Pipe lids (can be found where you buy pipes :) )
3. Carpet
4. Sponge
5. Paint
6. Knife, Screwing Tool, Sandpaper

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01456.jpg

1. Cut the pipe into the size you want (i don&#39;t recommend larger than 10cm). Use the sandpaper to smooth the borders of the pipe.

2. Use the screwing tool (i&#39;m not sure if thats the name), to create a screw on the pipe, so you can later on attach the lid. Do it on both sides, because you need a lid for the carpet/sponge tip, and another lid to refill the marker.

You can also paint the pipe (spray paint works) right now, or can do it later on.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01460.jpg

This is how it should look
http://img.photobucket.com/albums/v146/toozler/marker/Dsc01461.jpg

3. Now the tricky part.. Depending on what kind of paint you&#39;re using, the carpet X sponge ratio will change. If your paint is very THICK, then you must use a lot more of SPONGE. Probally you will have to try a few times before you find the perfect ratio, so your marker won&#39;t be dripping or impermeable.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01462.jpg

In this case, i was using a very thin paint, so thats why i&#39;m using a lot of carpet. Roll the carpet, with the sponge inside, and place it inside the pipe.
Make sure its tight, or it&#39;s gonna fall. If it&#39;s not tight, add more sponge or carpet.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01463.jpg

Inside the pipe:
http://img.photobucket.com/albums/v146/toozler/marker/Dsc01464.jpg

4. Rub the tip on the sand paper, or on a cement floor, so it will be smoother. (never forget to do this step if you&#39;re using a lot of carpet)

5. Fill your marker, and put the lids on :) . Remember to always have the lid on, and the tip down.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01474.jpg
peace to toozler from stencilrevoulution for this..

[infer one]

nice marker there

[Havoc411]

the "screwing tool" is called a tap

[element503]

Originally posted by DNA@Jan 3 2005, 11:05 PM
here&#39;s a nice tut. just as it is in the inks thread
http://img66.exs.cx/img66/6861/ghettokrinkthetut6mo.jpg
how drippy is that? i dont really want MAD drips. i atleast want it readable.

[{MaD MIzE}]

man somebody post how to make your own paint cans that would be tight

[Tony]

........

[dez1]

Originally posted by shyone@Mar 2 2005, 03:09 PM

Fairly easy to do, doesn&#39;t even need a tutorial for this, but might help you out with some advices and save you some time.

Materials
1. Platic Pipe (the diameter is up to you..)
2. Pipe lids (can be found where you buy pipes :) )
3. Carpet
4. Sponge
5. Paint
6. Knife, Screwing Tool, Sandpaper

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01456.jpg

1. Cut the pipe into the size you want (i don&#39;t recommend larger than 10cm). Use the sandpaper to smooth the borders of the pipe.

2. Use the screwing tool (i&#39;m not sure if thats the name), to create a screw on the pipe, so you can later on attach the lid. Do it on both sides, because you need a lid for the carpet/sponge tip, and another lid to refill the marker.

You can also paint the pipe (spray paint works) right now, or can do it later on.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01460.jpg

This is how it should look
http://img.photobucket.com/albums/v146/toozler/marker/Dsc01461.jpg

3. Now the tricky part.. Depending on what kind of paint you&#39;re using, the carpet X sponge ratio will change. If your paint is very THICK, then you must use a lot more of SPONGE. Probally you will have to try a few times before you find the perfect ratio, so your marker won&#39;t be dripping or impermeable.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01462.jpg

In this case, i was using a very thin paint, so thats why i&#39;m using a lot of carpet. Roll the carpet, with the sponge inside, and place it inside the pipe.
Make sure its tight, or it&#39;s gonna fall. If it&#39;s not tight, add more sponge or carpet.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01463.jpg

Inside the pipe:
http://img.photobucket.com/albums/v146/toozler/marker/Dsc01464.jpg

4. Rub the tip on the sand paper, or on a cement floor, so it will be smoother. (never forget to do this step if you&#39;re using a lot of carpet)

5. Fill your marker, and put the lids on :) . Remember to always have the lid on, and the tip down.

http://img.photobucket.com/albums/v146/toozler/marker/Dsc01474.jpg
peace to toozler from stencilrevoulution for this..
see in belfast where im from, if the police found that on u, they would try 2 do u with haveing explosives. as that looks EXCATLY like a pipebomb, 1 of the paramilliterys favourite weapons....
http://sageauthoring.com/sage/sphotos/investigation/bomb_makings1a.jpg
no bullshit they would fuck u in jail for haveing that....there funny about bombs in this countery, cant think y <_<

[Dayzer]

thanks for the tutorial, very helpful, i just threw away my old crappyass mop, and i&#39;m about to make one from you&#39;r design

[soapy_FATcap]

how do you make a mop out of a bingo dabber, i cant get the nib out w/out ripping it... shit i cant even get it out with ripping it any help would be good and so would a step bi step wit pictures :D

[ILL]

Originally posted by soapy_FATcap@Mar 8 2005, 05:57 PM
how do you make a mop out of a bingo dabber, i cant get the nib out w/out ripping it... shit i cant even get it out with ripping it any help would be good and so would a step bi step wit pictures :D
idk cuz i&#39;v never used one but i think you have to pull it out or turn it until it comes out you could try that if you want

[maze.dsk]

Originally posted by soapy_FATcap@Mar 8 2005, 04:57 PM
how do you make a mop out of a bingo dabber, i cant get the nib out w/out ripping it... shit i cant even get it out with ripping it any help would be good and so would a step bi step wit pictures :D
well if you buy the bingo dabers from the dollor tree they just pop off but the suck so i pulled the hole thing off filled it up with pure house paint the put a towel nib

[LeeR]

Originally posted by soapy_FATcap@Mar 8 2005, 04:57 PM
how do you make a mop out of a bingo dabber, i cant get the nib out w/out ripping it... shit i cant even get it out with ripping it any help would be good and so would a step bi step wit pictures :D
you dont need to take off the nib , u can just make a hole in the back fill it up with ur ink then pop in a couple fish oil tablets for ghost tags after ur done u just apply some glue around the hole tape up the hole and for more protection put a sitcker around it
http://img189.exs.cx/img189/4422/img04620sh.th.jpg (http://img189.exs.cx/my.php?loc=img189ℑ=img04620sh.jpg)
http://img134.exs.cx/img134/2148/img04610rg.th.jpg (http://img134.exs.cx/my.php?loc=img134ℑ=img04610rg.jpg)

[element503]

1. Buy a marker / paint

2. Use it

[Havoc411]

1. lower my standards

2. beat up a 12 year old kid

[Slim_AFK]

I saw a guide for making a marker with a peice of PVC pipe somewhere on BS, does anyone know where that is, ive been searching for days&#33;

[Steez]

Originally posted by Slim_AFK@Mar 10 2005, 07:26 PM
I saw a guide for making a marker with a peice of PVC pipe somewhere on BS, does anyone know where that is, ive been searching for days&#33;
um....go back to page 17.

[Stlk]

LeeR is a smart little fucker isnt he? thanks LeeR i wuz havin that problem too.

[laz'e]

few good tips there cheers:D

[Silvar]

laze you fuckin muppet i been online for like 10 mins and all i can see in every thread is some useless post by you. are you replying to everythin u can?

FUCKIN POST WHORE.

if you really feel the need to tell someone how great u think they are (arselicker) then pm them

muppet.

[nukone]

it isnt just the nib that comes off a bingo dabber there is a small plastic ring around it...
get plyers and gently pull it off

[bigbomba']

cut the nib off and use a chalk board eraser

[runci]

the easiest way i found was to get a shoe polish thing take out the nib wiv the plastic thing empty out the hsoe polish and add own ink or thinend out paint...
easy..

[demoter]

with the bingo dabbers at my dollar store whenever i cut it open n try to put my own ink it makes the plastic all mushy n fucked up soggy like? any tips