fire extinguisher + paint

[RUSE173]

how do you make the paint extinguisher?
is it as easy as filling it up with paint? or do you mix it with the foam stuff?

[CrustOner]

Who approved this?

Anyway: You need an old-school fire extinguisher. The silver ones work only. There's already a post about it in the Step-Bi-Step thread, I believe. So check that out, and you should probably find it.

[goonzatwork]

should merge this wit a Fire Extinguisher Tags picture gallery or some shit

[Flawless Victory]

Threads don't get approved in the T&T section, they just get posted.

[Vagrant]

how do you make the paint extinguisher?
is it as easy as filling it up with paint? or do you mix it with the foam stuff?

http://tinyurl.com/ydhgzw4

[RUSE173]

thanks for the tip about the silver ones, many thanks

[RUSE173]

and hell followed with is an AMAZING band check em' out

[Vagrant]

nope

[springbreak95]

you can use any extinguisher if its the more common red small one you just unscrew the top fill it up and pressurize it with a bike pump with the valve under the gauge on the side of the handle

[Noz]

the whole fire extinguisher+paint thing sounds like it equals a mess....

[Vagrant]

...That's the point

[Noz]

datz dumb, how does it come out?

[DoMakeSayThink]

http://www.youtube.com/watch?v=IBRfo8LCGHg

[Vagrant]

datz dumb, how does it come out?

magic.

[whosthisguy]

It's pretty easy, and fuck all the how to sites and all that bullshit.

1. Acquire a silver one, with a black hose.
2. Shoot out all the shit inside of it. Make sure you get all of it out.
3. Unscrew top, and clean inside out.
4. Fill up a little more than 1/3 of the Fire Exstinguisher with bucket paint.
5. Fill up a little more than 1/3 with water.
6. Take a ride to the gas station, and use the air pump to fill up with air. If the pop is broken, it usually takes about the entire time the pump is on.
7. HAVE FUN! Make a mess! Wear shitty clothes and shoes.

[Flawless Victory]

Just mix the paint and water 1:1 before you put it in the extinguisher.
Saves a lot of time that would be spent on shaking up a huge metal cylinder

[ShIfTeD]

people are so dumb, if anything filling a fire extinguisher with paint is common sence

you open it, you obviously thin the paint so its able to move through the valve and the hose..and then you close it and fill it back up with air

fuck!

and hell followed with is straight, cool dudes...not a big fan of their music though

[Vagrant]

y'know, i'm not quite certain how this is done, yet
can someone explain how to do this?

???
O.o

[kmcdon3960]

IIRC, you can just unscrew the top and fill that bitch (make sure it's not pressurized)
Then, there should be a schrader valve on the top you can pump air in with any bike pump or air compressor

[Asetotheurn]

hey ruse are you from boston?

[RUSE173]

naww man C to the ANADA :p

[Karse]

I went for it today, but came out pretty darn shitty. I used oil based paint (DON'T MAKE THE SAME MISTAKE) and filled the other half with water. When I tried it out, the water and the paint came out horrible. First the water, then the paint oozing out. Make sure you use WATER BASED paint to not make the same mistake as me ;) Also, pressurize until the machine at the gas station turns off.

[onoez]

will a supersoaker do somewhat the same?

[Fury]

^ i lol'd.

[onoez]

i know lol mad toy but i've heard of people using supersoakers so im wondering what it'd look like..

[Fury]

It'd probably just look like what you'd do with water. It could work I guess, but prepump beforehand!

[realtalk]

i bet it would work..this isnt a normal supersoaker but its still used wit water
http://www.youtube.com/watch?v=XBfF5C-A1pw

[Noz]

sounds cool, except you would have no control with it

[rush2]

practice makes perfect :)

ive used a super soaker before it was so much fun

[Flawless Victory]

1/2 latex
+
1/2 water
+
1 extinguisher
and
2 quarters
+
1 gas station


/thread

[Mister.Miyagi]

not 100% sure but ive heard people using those weed killer containers and just pumping them up and spraying... it would do the same thing just not shoot as far i reckon.

[Noz]

practice makes perfect :)

ive used a super soaker before it was so much fun

lol word?
wut ratio of paint 2 water u used?

[Flawless Victory]

1|1

[trowel]

I used oil based paint and filled the other half with water.

That was your mistake. why would you mix water with oil XD

Latex or acrylic base you can use water
oil base use a thinner or mineral spirits....

[obrutalityx]

i'ma bout to get ahold of 30 fire extinguishers, if anyone wants to buy em, hit me up.

[H3TT1NG3R]

ive used extinguishers and weed killers....

extinguishers are dope, make sure u get a silver one with the schrader valve, and just unscrew fill and pump up

the weed killers can do some dope flairs, but dont cheap out and get the 20$ one, it sucks. mine clogged with thinned bucket paint and wouldnt flare much since it kept clogging and just did a gay thin stream

[obrutalityx]

the silver one is the ones we got,

i got about 20 right now.

[youralltoys]

i'ma bout to get ahold of 30 fire extinguishers, if anyone wants to buy em, hit me up.

you want the silver ones, which carry water in them. so if you get red ones you are a FAILURE!

[ShIfTeD]

I went for it today, but came out pretty darn shitty. I used oil based paint (DON'T MAKE THE SAME MISTAKE) and filled the other half with water. When I tried it out, the water and the paint came out horrible. First the water, then the paint oozing out. Make sure you use WATER BASED paint to not make the same mistake as me ;) Also, pressurize until the machine at the gas station turns off.


HAHAHAHA!!!

yeah, all this shit sucks, extinguishers are just too much work for me, from getting the bucket paint, to getting the right consistancy, to filling it up, to carrying the heavy ass thing

id rather just paint something bigger and use a ladder...but im lazy as fuck

and weed killers are a pain in the ass too, all it takes is that little bitch hose to come loose off the fitting and it squirts everywhere until theres no more pressure left
like i said, id rather just paint big

[obrutalityx]

already have a bunch of the silver ones.

got a connection with a dude that works with fire safety in my county.

they are the ones that you jjust unscrew, then fill up, then pressurize with a regular air pump.

[Tiktoker]

i wanna see a video of this working

[Flawless Victory]

http://www.youtube.com/watch?v=lT0bPRQXdRc
http://www.youtube.com/watch?v=3hyVUGxFPto
http://www.youtube.com/watch?v=u-KyhLnr0Tk

[zachatnca]

theres already a thread about this but you just put paint in and pressurize it then go out and waste it all on some ugly looking tag that i guarantee will end up as one big blob.