i have an oil colors like these but i dont know with what "diluent" i need to Dilute this to make ink out of it. please help -.-'

 

paint thinner, meth. spirits.
It'll never be ink, though. it's always going to be paint, and act like paint and work like paint.

 

Tubes of oil take like 755789525699754388)4 years to dry

 

anyone ever fucked with lime paint? not the color lime its acctualy called lime,i think it has a different base like powder or some shit,im not sure.. i have a whole bucket,about to paint my room with it..

 

its to be enviromentaly friendly
itl work just as good as acrilic

 

ok so there hasnt been a post here for a few days so im going to blurt out some recipis

super smexy indoors ink
add 1 ounce of gentian violet, malachite green, and iodine (dont use meth blue)
let it sit out until all water is evaporated and the crystals are at the bottom
add about 1 1/2 ounces of denatured alcohol
add some shellac to increace adhesion
then add benzo and dot 3

red plasti-ink(can be made blue also)
get a few of the red plastic cups you drink beer out of at parties(must be this sort of plastic)
cut them up into a bunch of small peices then add in acetone or mek and let sit for a day or two
there will be this white gunk at the bottom take it out and toss it (that is the inner layer of the cup which is not fully soluable in the acetone)
repeat if not opaque enough
add any stainer and benzo

nice indoor red ink
get a big bottle of malachite green
evaporate untill crystaline
dissolve in alcohol
boil down lemon juice and add enough till its the desired red color
add benzo and dot 3
(do the same with gentian violet for a green ink

black pigmented ink
get india ink and boil or evaporate into a sludge
add alcohol and some shellac(again to increase adhesion)
then add a couple drops of gentian violet
then benzo and dot3

never boil inks since the dyes and pigments are usualy organic and will burn and turn into carbon. but heating at a low temp is ok
india ink is ok because its already carbon pigment

 

double post lol

 

hm never thought about getting the color out of the cups haha, how well does that work?

 

that sounds mad crazy lol

 

its pretty sick
doesnt fade and really hard to get off
i might post a pic tomorow

 

what do you guys think of Mr. Black ink? dunno if I should get that, some Grog, or some Iladel paint

 

ive been wondering about it too
looks nice but idk about stain

 

I might be wrong but, I think the ink stains better than the paints and soak in deeper/faster

 

the same shit keeps getting repeated in this thread.... lol like people argue over the same shit that was being argued aboud 20-30 pages ago

 

mr. black did not live up to my expectations, maybe its better when its run thickly through a mop, but i tested out my friends marker on the side of the painted metal can that has xylene in it.

it didnt leave any stain, and came off first swipe using xylene.

ive gotten garvey to stain it, so i know its not the surface

 

alright. would you say the grog stains better than illdel ink? idk I can't decide what to get lol

 

get garvey, or any striaght dye based ink. for staining.

if u want staining and lasting, get garvey or w.e. and also some marsh, or pilot or another pigmented ink.

 

you fucking dumbasses keep putting dot 3 in your ink IT DOESNT DO SHIT

 

really?
acutally it does do something, and if you van name what it does correctly, i wont think your a dumbass