Menu

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

Step Bi Step

Discussion in 'Tools and tips' started by CHILLEN905, Dec 29, 2004.

Share This Page

  1. T R E O

    T R E O Elite Member

    • Messages: 1,222
    • Likes Received: 0
    sorry for the late reaction everyone.
    ok now back on topic
     
  2. AVID1

    AVID1 Senior Member

    • Messages: 255
    • Likes Received: 0
    no I meant the drink.. dunk your caps in a bath of coca-cola and see what happens. You'd be surprised.\

    No my friend was not in a wheelchair permanently, but he was for like 7 months. shit was fucked up. Don't feel like explaining what happened.

    I was walking around earlier and I experimented the types of rocks for scratching windows, and found this really good one!!! it makes 1 inch thick lines and with a bit of yoyo movement you'll be able to get whole bus shelters. it's really light brown/red with wierd little holes in it, looks like a mineral. I think it will last about 2 weeks of hardcore tagging cause I covered 2 windows with 1 tag on a bus shelter and it crumbled a bit. actually, now that I think of it, it looks like rock from a brick. Someone try breaking a brick or finding shards ofa brick and using it..
     
    Last edited: Jun 22, 2007
  3. sk8er6

    sk8er6 Senior Member

    • Messages: 336
    • Likes Received: 1
    does the coke clean the caps? i didnt know the citric acid in them was strong enough to eat paint.
     
  4. fnt

    fnt Senior Member

    • Messages: 213
    • Likes Received: 1
    I doubt it will, but give it a try, and have fun with your sticky clean caps

    I'm thinking of trying more agressive thinners like laquer thinner, xylene, and acetone
     
  5. d_g

    d_g Elite Member

    • Messages: 1,211
    • Likes Received: 3
    Avid, I think the rock you're talking about is scoria. It's a volcanic type of rock, it's also used sometimes to fill holes to help with drainage of water.

    I doubt coke would do a good job of cleaning caps. Start off with paint thinner, that should clean most of them, and try acetone on the stubborn ones.
     
  6. fnt

    fnt Senior Member

    • Messages: 213
    • Likes Received: 1
    thinner cleans paint off of caps, but not in caps does that make sense?
     
  7. sk8er6

    sk8er6 Senior Member

    • Messages: 336
    • Likes Received: 1
    yea, i know what u mean it cleans the paint off the outside, but doesnt go through the valve n shit.
     
    Last edited: Jun 26, 2007
  8. kelio

    kelio Senior Member

    • Messages: 130
    • Likes Received: 0
    i figured out how to open the zigs and shit. and the reason they are so difficult to open is because they put super glue on the inside of the top part, if that makes sense.

    ai181.photobucket.com_albums_x108_hoop_blah_54e7775b.jpg
    ai181.photobucket.com_albums_x108_hoop_blah_2a8f6d94.jpg
    ai181.photobucket.com_albums_x108_hoop_blah_7201d7c2.jpg
    ai181.photobucket.com_albums_x108_hoop_blah_fd8243fc.jpg
     
  9. *KNOTTY_BOY*

    *KNOTTY_BOY* Member

    • Messages: 15
    • Likes Received: 0
    you can get paint from walmart in the toys section they sell ink and spray paint fro mode cars it works great
     
  10. sk8er6

    sk8er6 Senior Member

    • Messages: 336
    • Likes Received: 1
    im a real man. i dont use zigs, i rock martha stewarts. YEAHHH MARTHA STEWART. seriously, and you can open them with your bare hands, or a rubber band.
     
  11. Rogue

    Rogue Guest

    What does that have to do with anything? And your wrong, that paint sucks horribly.


    Post more Step Bi Steps and less chit chat
     
  12. fnt

    fnt Senior Member

    • Messages: 213
    • Likes Received: 1
  13. kelio

    kelio Senior Member

    • Messages: 130
    • Likes Received: 0
    im sure they have them at Michaels. if not they are prolly bigger magnets and you could just cut them. and btw i didn't think magnets worked good cause the ball inside stops moving so the paint doesn't mix up. and not all cans you can silence because the balls inside are not metal, just so u know.
     
  14. Kayone707

    Kayone707 Moderator

    • Messages: 10,009
    • Likes Received: 43
    ^can silencers in home depot... hahah. good luck kid.
    just get a strong magnet. (the magnets only work on euro paint.)

    sk8r6
    Police use Coke to clean up blood from concrete. put a nail in a jar of coke and leave it for one week see what happens. the shit in coke is hella strong/bad for you.
    but it taste good.
     
  15. fnt

    fnt Senior Member

    • Messages: 213
    • Likes Received: 1
    krylon uses plastic balls, but rusto uses metal, so I think it should work

    they're not like montana's can silencer's, they're just 20lb and 40lb(strength) magnets that fit well into can bottoms. they have the in the ultimate graff guide http://www.a2planet.com/guide/work/index-revc.html#11

    you don't keep them on there all the time, just when you don't want them making noise, then just take them off hen you need to shake it
     
  16. MiNZ

    MiNZ Senior Member

    • Messages: 99
    • Likes Received: 0
    awww.seacorals.com_3801a.jpg
    lava rocks?
    uc an find em at the base of trees sometimes or just randomly around the black ones cut deeper tho
     
  17. KLYPSE6193

    KLYPSE6193 Banned

    • Messages: 109
    • Likes Received: 0
    yeah lava rock makes sik scratch tagz
     
  18. RaZoR123

    RaZoR123 Senior Member

    • Messages: 371
    • Likes Received: 0
    So do diamond tipped dremel bits...
     
  19. iwritebasic

    iwritebasic Senior Member

    • Messages: 381
    • Likes Received: 1
    um i could do this w/o the little gripper thing. but props for the instructions, ur editing is pretty good, it jus fits with the pic ya know?
     
  20. kelio

    kelio Senior Member

    • Messages: 130
    • Likes Received: 0
    ha thanks iwritebasic i couldn't get them open without it so i showed everyone how i do it lol. but thanks. hopefully it will help someone out.