Pressure is the compressed air in the can....If there is low pressure it will come out slow and you'll be able to do smaller lines like belton, high pressure comes out faster and bigger.
i read somewhere that low pressure is actually variable pressure meaning if you press down lightly their is less pressure and if you press it all the way down its full pressure but high pressure cans are fixed rate pressure so no matter how much you press the cap down it'll always come out the same, just like on and off
damn i keep thinkin up questions on the fly. im not a post whore. jus curious. how do you refill a pilot? do you jus pour the ink onto the cotton inside of it??
Hey does anybody know if the name "yers" is taken? I'm sick of the v and the o in my name. Was thinking of switching to that.
ok. so hypothetically speaking: say one knew of an area full of rich mutherfuckers and he wanted 2 piss the hell out of them with sum etch. however the area one lives in has no acces to etch selling establishments. how would one "cook up a batch of that fucked up shit" per say? yes i kno. dont use etch. but hypothetically speaking
What is the best marker or mop as far types of surfaces it can be used on? Like most normal markers can only be used on metal, plastic, glass, etc, but I was wondering if there was any markers out with truly tough nibs that can cover a wider range of surfaces such as concrete or stone. (And actually look have decent without destroying your nib.)
Reading the last couple pages of this thread made me realize a lot of people want to be babied, no offense, but sometimes have to learn something yourself. One guy asked if you can use two different brands of paint together, of course you can! Things like this are common sense it would seem, but yeah also the guy who asked if your tag can be a character, there are no rules to graffiti, so just do it. People overcomplicate graffiti a lot, but honestly it's writing on the walls and that's it, so just throw up your character who cares if its a tag or not. Lastly I would like to recommend to anybody in here who wants to get better to use bars, and draw simples until your sick in the stomach until you can do them backwards in your sleep then when you think you are good enough to stop doing simples, keep doing them because you still suck. Eventually you will just make it better and better until you find something you like. this is just a general post to all toys...
a ? i was making ghetto krink the other day and i used rustolem 8 oz can and half of the can of paint thinner. thats 2/3 paint and 1/3 thinnner ..correct me if im wrong.its really thick should it be like acrylic like? what do you think i did wrong.
U usually use outdoor bucket paint, and it depnds on your thiner, isopropyl alcohol works good for me.
D-D-D-D-D-DUMB ASS! Use the base of your paint/ink. If it is oil based use thinner/stripper, if its ink use alcohol/DA, if its acrylic use water. Just add more thinner untill you get the consistency you want, just remember that paint doesnt flow through pens with out other chemicals (like xylene) so it only needs to be thin enough to go through a mop.
i had the same problem. so i added some brake fluid and a bit more thinner. works fine. and remember that if your using a mop like a junobo mop you have to take out the regulator or the paint(ink) wont go through.
Why does every one think the Sakura's are only used by toys? I've seen amazing shit done with sakura's and some gorgeous tags every where using a sakura.