Menu

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

Chemistry 101:Beginner Ink Labs and Pics

Discussion in 'Toys forum' started by HëRbN, Jul 2, 2008.

Share This Page

  1. proNYNJA

    proNYNJA Senior Member

    • Messages: 297
    • Likes Received: 0
  2. CrustOner

    CrustOner Elite Member

    • Messages: 1,822
    • Likes Received: 1
    The exact same thing on the first image post of the inks and recipes thread.
     
  3. Lunchbox

    Lunchbox Senior Member

    • Messages: 314
    • Likes Received: 1
    Not all, like some mettalics are hard as fuck to go over.
     
  4. skull-e

    skull-e Elite Member

    • Messages: 1,086
    • Likes Received: 0
    meh, once it's been there for a while, the paint covers quite nice actually.

    you can use nitro is you really want.

    otherwise, paint goes on real nice over paint.
     
  5. proNYNJA

    proNYNJA Senior Member

    • Messages: 297
    • Likes Received: 0
    what are some add ins to put in your alcohol,pen,and dot3 ink mix that will make your ink as black as you can get it?
    and were can you get the add ins?
     
  6. Fury

    Fury Elite Member

    • Messages: 1,889
    • Likes Received: 2
    How can you get the ink out of pens? I can't seem to figure it out with the pen I'm using. I got the tube out but I can seem to make it go and stuff.
     
  7. proNYNJA

    proNYNJA Senior Member

    • Messages: 297
    • Likes Received: 0
    what you mean go and stuff?
     
  8. Fury

    Fury Elite Member

    • Messages: 1,889
    • Likes Received: 2
    By the way, I meant to make it say "can't."

    Like get out of the tube and into the container. I'm assuming I need to just leave the entire thing inside of the alcohol and let it do the rest?
     
  9. proNYNJA

    proNYNJA Senior Member

    • Messages: 297
    • Likes Received: 0
    yea pretty much, but cut off the ballpoint part and the part of the tube at the end with no ink in it so you will get the most ink possible, else some in will get stuck in the tubes ya know.
     
  10. Fury

    Fury Elite Member

    • Messages: 1,889
    • Likes Received: 2
    Okay thanks. About how many regular office pens will I need to fill up a bottle of shoe cleaner?
     
  11. CrustOner

    CrustOner Elite Member

    • Messages: 1,822
    • Likes Received: 1
    I'd say get 80 to be safe, and therefore one full cup of 91% alcohol.

    Find a tin can first, or any plastic can. Then fill it with your alcohol. Cut the pens about an inch from the tip, then throw the tip in, and pull out the white tube. cut the tube where the ink ends, then throw it in. Repeat 80x, then leave them all in the alcohol overnight. shake it up a bit before you go to sleep to be safe. Then wake up, and you're good to fill up a bottle! Caution: Don't get any of the tubes or tips into the bottle. Then you're good to go! :D

    Use a water bottle, then you have some leftover if you don't fill up the Shoe Cleaner mop.
     
  12. skull-e

    skull-e Elite Member

    • Messages: 1,086
    • Likes Received: 0
    fiebings edge dressing is really nice to add to ink

    sexy opaque permanentness
     
  13. Fury

    Fury Elite Member

    • Messages: 1,889
    • Likes Received: 2
    Any idea on how to get 80 pens for cheap? And how can I prevents the tubes and tips from getting inside the water bottle?
     
  14. CrustOner

    CrustOner Elite Member

    • Messages: 1,822
    • Likes Received: 1
    there's always racking. or you can go to Target and get them in pack of 10 for a low price, I think. and just be careful. the ink will go out before the pens do.
     
  15. proNYNJA

    proNYNJA Senior Member

    • Messages: 297
    • Likes Received: 0
    where can u buy that fiebling edge dressing?
     
  16. Marke

    Marke Member

    • Messages: 40
    • Likes Received: 0
    Is there anything I can add to thicken up my ink a bit without changing the color much?
     
  17. Noddles912300

    Noddles912300 Senior Member

    • Messages: 311
    • Likes Received: 0
    If it pen ink, just add more pens.
    For things like GK add more paint. You can also evaporate some of the alcohol or what ever the base is.
     
  18. proNYNJA

    proNYNJA Senior Member

    • Messages: 297
    • Likes Received: 0
    can i drop some crushed oil pastels in my pen,alcohol, and dot 3 ink mix to make it blackker?
     
  19. Fury

    Fury Elite Member

    • Messages: 1,889
    • Likes Received: 2
    What does vinegar do? What are other things I can mix inside of it and what do they do?

    Edit: I found 20 pens for a dollar at Target, if anyone's wondering. It's also $2.99 for shoe cleaner as well.
     
    Last edited: Jun 1, 2009
  20. GreasyPhilCollins

    GreasyPhilCollins Member

    • Messages: 29
    • Likes Received: 0
    I don't think that would work, but I may be wrong. You could add some charcoal (homemade or artists, not BQQ), if you add too much just use a coffee filter or something to drain it out.
     
    Last edited: Jun 3, 2009