Menu

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

Step Bi Step

Discussion in 'Tools and tips' started by CHILLEN905, Dec 29, 2004.

Share This Page

  1. ILL

    ILL Elite Member

    • Messages: 1,337
    • Likes Received: 1
    Guide to make a chap stick marker

    1. empty out and clean a chap stick container
    2.get a candle and melt some wax in the container so it makes it water proof
    3.test the container with water to make sure it won't leak and if you wan't you can put some tape around the bottom to help keep it from leaking
    4.cut a strip out of a sock or something for the nib
    5.roll the strip and put tape around the bottom of the strip to hold it together
    6.put the ink in the container
    7.stick the strip in the container and if it dosen't fit cut some of the strip off and you can glue it in if it won't go in enuf that it won't come out
     
  2. hitshit89

    hitshit89 Senior Member

    • Messages: 149
    • Likes Received: 0
    COULD SOMEONE POST A GUIDE ON HOW TO MAKE AN ETCH MARKER?? :ph34r:
     
  3. CHILLEN905

    CHILLEN905 Elite Member

    • Messages: 1,855
    • Likes Received: 9
    BINGO DABBER!!!!! BUT IF U DONT EVEN KNOW HOW TO MAKE A MARKER U SHOULDNT EVEN BE GOIN ANYWHERE NEAR ETCH MAN
     
  4. Silvar

    Silvar Elite Member

    • Messages: 558
    • Likes Received: 0
    hehe stuff makin an etch marker... that lil dremel multitool handheld thingy is well good, jus put wateva tool bit u want on the end and scratch away! half as dangerous as etch...
     
  5. hitshit89

    hitshit89 Senior Member

    • Messages: 149
    • Likes Received: 0
    yo chillen i like i said i know a shit load about etch and have used my friends etch i know how dangerous it is and what to do if you get any on you its just that i cant make a good etch marker :ph34r:
     
  6. Steez

    Steez Senior Member

    • Messages: 220
    • Likes Received: 0
    this should be stickied...........................
     
  7. Havoc411

    Havoc411 Elite Member

    • Messages: 6,266
    • Likes Received: 1
    top, common sense bud
     
  8. Jedi

    Jedi Member

    • Messages: 39
    • Likes Received: 0
    the paint is going to go into the can that has less pressure.

    depending on how you do it, that would be the cold one. i think.
     
  9. Havoc411

    Havoc411 Elite Member

    • Messages: 6,266
    • Likes Received: 1
    yeah, but the cold one should be on top cause if you know how the valve on a can works you'd know why
     
  10. casperFT

    casperFT Senior Member

    • Messages: 487
    • Likes Received: 1
    you use stock caps
     
  11. Havoc411

    Havoc411 Elite Member

    • Messages: 6,266
    • Likes Received: 1
    theres nothing wrong with stock caps. you can get some thin lines with stock rusto caps
     
  12. pogopope

    pogopope Senior Member

    • Messages: 391
    • Likes Received: 0
    thanks, first i thought the bottom cos of gravity, then i thought the top cos it was spraying up, then....i was confused

    thank you tho. its nice to learn something new, ill have to give it a try tomorro
     
  13. Havoc411

    Havoc411 Elite Member

    • Messages: 6,266
    • Likes Received: 1
    paint valves have a plastic "straw" coming off them to the bottom of the can so when you hold it upside down its blowing out air not paint, and vise versa. so when you hold it upside down your not gonna get paint from that can in the other can just in case it dosent work or whatever.
     
  14. Havoc411

    Havoc411 Elite Member

    • Messages: 6,266
    • Likes Received: 1
    that already answered them
     
  15. Kayone707

    Kayone707 Moderator

    • Messages: 10,014
    • Likes Received: 33
    that already answered them [/b][/quote]
    shut up bitch dont try to correct me or say that u posted the answer first
     
  16. CrAiG

    CrAiG Member

    • Messages: 25
    • Likes Received: 0
    :ph34r: Do you know how to make an XXL drip marker ???
     
  17. bumsuckfun

    bumsuckfun Elite Member

    • Messages: 667
    • Likes Received: 0
    i can't figure out if this guy is
    1) retarded
    2) ignorant
    or 3) just messing around.
     
  18. mplskid

    mplskid Senior Member

    • Messages: 223
    • Likes Received: 0
    can someone post how to mod a woodcraft? do you keep the pump and ball in the marker?
     
  19. bumsuckfun

    bumsuckfun Elite Member

    • Messages: 667
    • Likes Received: 0
    mod in what way? like putting in your own ink? or to like make it drip and stuff? there is more than one mods for those markers...
     
  20. mplskid

    mplskid Senior Member

    • Messages: 223
    • Likes Received: 0
    i tried filling it with krink and it didnt work are you supposed to take out the ball, pump, both or neither?

    also how do you make black and white paint for makers the same way as krin with just different color paint?